ELIVED YD3018 Long Arm TV Mount Instruction Manual Product Information (2024)

YD3018 Long Arm TV Mount

Specifications

• Product Dimensions: 400mm/15.75, 300mm/11.81, 200mm/7.87,
  100mm/3.94

• Thickness: 6.5mm/0.26

• Load Capacity: MAX: 77 lbs (35 kg)

Product Usage Instructions

Safety Caution

Please read this instruction carefully before installation. If
you do not understand these instructions or have doubts about the
safety of the installation, assembly, or use of this product,
please contact us.

This product is designed for use in wood stud or solid concrete
walls. DO NOT install into drywall alone. The wall must be capable
of supporting five times the weight of the TV and mount combined.
Incorrect installation may result in product damage, property
damage, or bodily injury. We shall bear no responsibility for any
damage or injury resulting from incorrect installation, incorrect
assembly, or misuse.

WARNING: This product contains small items that could be a
choking hazard if swallowed. Before starting assembly, verify all
parts are included and undamaged. If any parts are missing or
damaged, do not return the damaged item to your dealer; please
contact our customer service team. Never use damaged parts!

Must Check Before Getting Started

Before getting started with the installation, please ensure the
following:

• Verify Your Wall Construction: Ensure that your wall is a wood
  stud or solid concrete wall.

• Select Correct TV Screw Diameter: Choose the correct screw
  diameter (M6, M8, or M4) for your TV.

• Select Correct TV Screw Length: Use the appropriate screw
  length to ensure proper installation. Too short screws will not
  hold your TV, while too long screws may damage your TV.

• Which Situation Needs Spacers? If the screw is too long or the
  surface is uneven, please choose the appropriate screws and spacers
  for your TV. Spacers are needed for more spacing between the
  bracket and TV, protruded back TV, counterbore of TV, or to avoid
  blocked input.

• Do not tighten the screws excessively or use an electrodrill to
  tighten them, as it may damage your TV. Not for M8 Screws.

Installation Steps

Option A: Wood Stud Installation

A-1: Locate Your Studs

– Verify and mark the center of the stud by finding the stud
edges using an awl and stud finder.

– Line up the holes with your stud center line. Level the
mounting template and mark the pilot hole locations.

A-2: Drill Pilot Holes

– Drill pilot holes using a 7/32 in (5.5mm) diameter drill
bit.

– IMPORTANT: Do not drill holes into where water pipes or
electrical wires are located. Be sure to drill into the center of
the stud.

Option B: Solid Concrete Wall Installation

B-1: Level the Mounting Template

– Mark the pilot hole locations on the concrete wall.

B-2: Drill Pilot Holes

– Drill pilot holes using a 3/8 in (10mm) diameter drill
bit.

– IMPORTANT: Do not drill holes into where water pipes or
electrical wires are located, or mortar between blocks.

Hang and Secure TV to Wall Plate

3-1: Before hanging the TV, please conduct a wall plate
installation integrity test first.

FAQ

Q: Can I install this product on drywall?

A: No, this product is designed for use in wood stud or solid
concrete walls. Installing it on drywall alone is not
recommended.

Q: What is the maximum load capacity of this product?

A: The maximum load capacity is 77 lbs (35 kg).

Q: How do I select the correct TV screw diameter and

length?

A: Please refer to the instructions provided in the “Must Check
Before Getting Started” section. Choose the appropriate screw
diameter (M6, M8, or M4) for your TV, and use the correct screw
length to ensure proper installation.

Q: When do I need to use spacers?

A: Spacers are needed when the screw is too long or the surface
is uneven. Use spacers for more spacing between the bracket and TV,
protruded back TV, counterbore of TV, or to avoid blocked
input.

INSTALLATION INSTRUCTION
YZ2305_US1.0

Product Dimensions
400mm/15.75″ 300mm/11.81″ 200mm/7.87″ 100mm/3.94″
6.5mm/0.26″

89mm/3.5″ 34mm/1.3″

100mm/3.94″ 200mm/7.87″ 300mm/11.81″ 400mm/15.75″ 272mm/10.7″ 294mm/11.6″315mm/12.4″

If you have any questions, please feel free to contact Customer Service viaAmazon before returning.
Safety Caution
Please read this instruction carefully before installation. If you do notunderstand these instructions or have doubts about the safety of theinstallation, assembly or use of this product, please contact us.
This product is designed for use in wood stud or solid concrete wall.
– DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV andmount combined. Incorrect installation may result in product damage/propertydamage or body injury.
We shall bear no responsibility for any damage or injury resulted fromincorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard ifswallowed. Before starting assembly, verify all parts are included andundamaged. If any parts are missing or damaged, do not return the damaged itemto your dealer; please contact our customer service team. Never use damagedparts!
Must Check Before Getting Started

W H

Minimum VESA Pattern (W × H): 100mm × 100mm / 4 in × 4 in
Maximum VESA Pattern (W × H): 400mm × 400mm / 16 in × 16 in
inches cm

Load Capacity
MAX: 77 lbs (35 kg)

Verify Your Wall Construction

<5/8″(16mm)

Min. 4″ (102mm)

Min. 2″ (51mm)
Wall with wood studs

Perfect!

CAUTION: Avoid potential personal injuries and property damage! Drywallcovering the wall must not exceed 5/8 in. (16 mm). Minimum wood stud size:nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm).

Min. 8″ (203mm)
Solid concrete wall

Perfect!

CAUTION: Avoid potential personal injuries and property damage! Mount the wallplate assembly directly onto the concrete surface (no surface covering).

CAUTION: DO NOT install into drywall alone.

Level
±3°

8.3mm/0.33″

411mm/16.2″ 235mm/9.3″

8.5mm/0.33″

354mm/13.9″

Swivel
±90°
325mm/12.8″ 950mm/37.4″

+5°
Tilt
-15°

206mm/8.1″

47mm /1.9″

65mm /2.6″

Supplied Parts and Hardware

Arm and Wall Plate VESA Plate

01 x1

02 x1

Wall / Product

Extenders

Mounting template

How to install your TV with an optimal viewing height?
Experts agree that 42 inches from the center of the TV to the floor is ideal.

42″(REF)

Attention on the VESA (TV Mounting Holes) Location

H V

H V

3A x2 3B x2

04 x1

Lag Bolt Open-end ST8x65mm Wrench

A x3

B x1

Carriage Bolt
C x8

Flange Nut Allen key

D x8

E x1

TV

Philips Screws Philips Screws Philips Screws

M4 x 12mm

M6 x 15mm

M8 x 25mm

M4 x 30mm

M6 x 30mm

M8 x 45mm

Spacers H10mm

Washers 6mm M4-5-6

Spacers H5mm

×4 ×4

×4 ×4

×4 ×4

×8

×4

×8

MA

MB

MC

MD

ME

MF

Bubble Level T1 ×1

Velcro Cable Ties T2 ×3

NOTE: Not all parts and hardware included will be used.
Extra Tools You Need (Not Supplied)

For Wood Studs

For Concrete Wall

7/32″ (5.5mm)

Stud Awl Wood

Finder

Drill Bit

3/8″ (10mm)
Masonry Hammer Drill Bit

2M
Band Tape

Pencil

Electrodrill

1/2″ (13mm)
Socket Screwdriver Wrench

200 mm

1 Attach Brackets to TV

1-1 Select VESA Plate Configuration
Measure the width and the height of the square or rectangle formed from theVESA holes pattern. Select the configuration to use based on the measurementfrom TV.

Top of TV
W

VESA Pattern (WxH)

Configuration

VESA Pattern (WxH)

Configuration

H

200mm 100mm

400 mm 300 mm

200mm 100mm

A for VESA Hole Pattern: 100x100mm, 200x100mm, 200x200mm.

C for VESA Hole Pattern: 400x200mm, 300x200mm
400 mm

300 mm

200 mm

D for VESA Hole Pattern: 400x300mm
400 mm
300 mm

400 mm 300 mm

400 mm 300 mm

B
for VESA Hole Pattern: 200x300mm, 200x400mm

E
for VESA Hole Pattern: 300x300mm, 400x400mm

1-2 Assemble VESA Plate and Extenders (When VESA > 200mm)
If your TV hole pattern is greater than 200×200mm, attach extenders (3A,3B) toVESA plate (02) using Carriage Bolts (C) and Flange Nuts (D).

3A

02
3B

B D

3B

3A

C

1 (Continued)
1-3 Select Correct TV Screw Diameter
M6 M8 M4
Select Correct TV Screw Length

Screw Bracket Spacer

Too Short Too Long Correct

Correct

CAUTION: Too short will not hold your TV. Too long will damage your TV.

Which Situation Needs Spacers?
If the screw is too long or the surface is uneven, please choose theappropriate
screws and spacers for your TV.

For more spacing between bracket and TV

For protruded back TV

For counterbore of TV

To avoid the blocked input

Do not tighten the screws excessively or tighten them by using theElectrodrill, or your TV might be damaged.

Not for M8 Screws M-E

M-A M-C M-B

UP

May be needed M-D M-F

Top of TV

2-A Attach Wall Plate to Wall

OPTION A: Wood Stud Installation

A-1
Center line

Min. 2″ (51mm)
Min. 4″ (102mm)
Wall in front of the wood studs < 16mm (5/8″)

T1
UP 04

Locate your studs. Verify and mark the center of the stud by finding the studedges using awl and stud finder.

Line up the holes with your stud center line. Level the mounting template andmark the pilot hole locations.

A-2

Wood Stud

Bit
2 ¾ in (70mm)
Deep

Drill pilot holes using a 7/32 in (5.5mm) diameter drill bit.
IMPORTANT: Do not drill holes into where water pipes or electrical wires arelocated. Be sure to drill into the center of the stud.
A-3

DANGER

Ø7/32 in Ø5.5 mm 3/8in 10 mm

2-B Attach Wall Plate to Wall
OPTION B: Solid Concrete Wall Installation
B-1

T1
UP 04
B-2

Level the mounting template and mark the pilot hole locations.

Bit

Concrete Wall

2 ¾ in (70mm)
Deep

Drill pilot holes using a 3/8 in (10mm) diameter drill bit.
IMPORTANT: Do not drill holes into where water pipes or electrical wires arelocated, or mortar between blocks.
B-3

DANGER

3 Hang and Secure TV to Wall Plate
3-1
Before hanging TV, please conduct “wall plate installation integrity test”first.

3-2
B

77 LBS (35KG)
pre-assembled screws and washers Remove 2 pre-assembled screws and washers,save them for using to next step.

4 Adjustments (If necessary)
4-1 Leveling Adjustment
If needed, TV can be leveled ±3 degrees via adjusting the 2 screws with theopenend wrench(B).
± 3°

B
Loosen the screws

Level the TV

4-2 Tilt Adjustment
1. Loosen the tilting bolts ×2. 2. Adjust TV to your desired angle. 3.Retighten the bolts to fix the intended angle.

-15° +5°

B
Tighten the screws
E

Lift and hang TV assembly onto the arm.

TV must be hung up by two person

5 Introduction to Applicable Scenarios
5-1 Crossing the wall

D2
<292mm(11.5″)

TV WIDTH D4

D1
<335mm(13.2″)

D3 > 560mm(22″) + D4÷2
1. The thickness of the wall D1 must be less than 292mm(11.5″). 2. Thedistance from the center of the wood stud to the wall edge D2 must be lessthan 335mm(13.2″). 3. The distance from the center of the wood stud to thewall edge D3 must be more than
560mm(22″) + TV width D4÷2. e.g. 65″ TV D3>1300mm(51.2″).

UP
AB

CAUTION: Do not use in drywall or wood stud!

Install wall plate using lag bolts A with Socket Wrench, NO Electrodrill. Noanchors when installed onto the wood studs.
CAUTION: To avoid potential personal injury or property damage: All 2 lagbolts A MUST BE firmly tightened to prevent unwanted movement of the wallplate assembly. Ensure the wall plate assembly is securely fastened to thewall before continuing on to the next step. To prevent the TV falling down,the Arrow Must Keep UP at this step!!

UP 01
A

Concrete Wall Anchor (NOT INCLUDED)

10×61mm

Contact us to have these additional pieces shipped directly to you.

Use the hammer to knock anchors (not included) into the concrete wall. Be surethe anchors are seated flush with the concrete surface.

Install wall plate using lag bolts A and anchors (not included) with SocketWrench, NO Electrodrill.

To

CAUTION: avoid potential

personal

inju0r0y2o8r p6r2o.peeprtys

damage:

All 3 lag bolts A MUST BE firmly tightened to prevent unwanted movement of

the wall plate assembly. Ensure the wall plate assembly is securely fastenedto

the wall before continuing on to the next step. To prevent the TV fallingdown, the

Arrow Must Keep UP at this step!!

5-2 Wall corner installation

B
Secure the TV plate to the arm
and wall plate with the removed
screws and washers from the
previous step.

Tighten

12″/16″/18″/24″

12″/16″/18″/24″

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual>>